Clearaudio
Clearaudio Nano Phono V2 - MM/MC phono preamplfier (grey)
Article number: 11005995
429.00 €
3% discount: 416.13 €
For payment by cash in advance (bank transfer) or pickup on the spot
Little in stock
Highlights
 |
Preamplifier for MM or MC | |
|
Precise RIAA equalization | |
|
handmade article | |
|
signal to noise ratio of up to 84 decibels | |
|
no loss of quality | |
|
Small size for installation near record player |
Article Description
The Nano Phonophonostage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
Technical Data
| Nano Phono V2 | |||
| Amplification @ 1 kHz: |
|
||
| Input impedance: |
|
||
| MM / MC input: | switchable by jumper (at bottom) | ||
| Subsonic Filter: | switchable by jumper (at bottom) | ||
| RIAA: | delay time: 75 µs / 318 µs / 3180 µs | ||
| RIAA accuracy: | ± 0.4 dB @ 20 Hz - 50 kHz | ||
| THD: | < 0,006 % MC ("A" weighted @ 1 kHz / -1 dB @ Max) | ||
| Headroom: | 18 dB / MC | ||
| Signal to noise ratio: | 70 dB ("A" Weighted) 81 dB ("A" Weighted) |
||
| Channel separation: | > 80 dB @ 1 kHz opposed channel hot-wired |
||
| Max. output voltage: | 10 V eff. (1 kHz) | ||
| Power supply: | ± 18 V DC / 300 mA | ||
| Headroom: |
|
||
| Input / Outputs: | unbalanced (RCA) | ||
| Dimensions W x H x D: | 85 x 25 x 106mm | ||
| Weight: | with power supply | ||
Scope of delivery
- 1 x Nano Phono V2
- 1 x power supply unit
- 1 x instructions
Suitable accessories
Certified shop
Safe shopping
SSL Data Protection Security
